CAUTION! Read Owner’s Manual before using this sharpener.
This is a listed appliance. It is intended for household use only. When using electrical
appliances, the following basic safety precautions should always be followed.
IMPORTANT SAFEGUARDS
• Do not use appliance for other than intended use.
• To protect against electric shock, do not put this appliance in water or any liquid.
• This device is not recommended for use by children and close supervision is necessary if used by or near children.
• Unplug from outlet when not in use or when cleaning.
• Avoid contact with moving parts.
• Before using the sharpener, uncoil the power cord and straighten to remove any kinks.
• Do not operate this appliance if the cord or plug has been damaged, the appliance has malfunctioned, or is
dropped or damaged in any manner. If this happens, return the appliance to Smith’s for examination and repair.
• The use of attachments not recommended or sold by the manufacturer may cause fire, electrical shock, or injury.
• Do not use outdoors.
• During sharpening, do not let the electrical cord hang over the edge of the counter or table, or come in contact
with a the knife being sharpened or a hot surface or stovetop.
• The appliance is designed to sharpen knife blades. Do not try to sharpen any other type of blade on this machine.
• Do not attempt to sharpen blades or tool edges that do not fit freely into the blade guide slots.
• Do not use with lubricants, water, or honing oil.
SAVE THESE INSTRUCTIONS.
WARNING! This electric knife sharpener will produce a very sharp edge. Use caution when
handling your knife after sharpening. Do not test knife sharpness by running your fingers or
any part of your body along the edge of the blade. To avoid injury, handle sharpened knives
with extreme care.
Compact Electric Knife Sharpener
Smith’s is proud to offer an easy to use and effective electric knife sharpener that incorporates
both mechanical and manual sharpening elements in one compact unit. This unique combination
provides a broad capability to easily sharpen dull blades and maintain razor sharp edges.
The mechanical sharpening slots feature a synthetic sharpening wheel and blade guides to hold
your knife at the correct angle during electric sharpening. The bonded synthetic materials used
to make the sharpening wheel are selected for their ability to guarantee longer wheel life, uniform
cutting, and minimum heat build up so that detempering of your blade does not occur.
After sharpening both sides of your blade with the synthetic sharpening wheel, Smith’s
recommends using the crossed ceramic rods in the manual finishing slot for final edge honing.
Crossed ceramic rods create a preset sharpening angle that lightly hones both sides of your
blade at the same time. Ceramic rods remove any burrs left on your blade from electric
sharpening and put a razor sharp edge on your blade. They can also be used for a quick touch
up of an already sharp blade.
Your Edge Pro Compact Electric Knife Sharpener will sharpen knives of alloy, carbon, or stainless
steel. It is designed to sharpen kitchen and most sporting knives. Do not attempt to sharpen
scissors, serrated blades, or any blade that does not fit freely in the blade guides. Listed below
are the unique features that set our sharpener apart from other electric knife sharpeners.
Manual Finishing Slot Features
Crossed Ceramic Rods for Final
Edge Honing or Quick Touch up
Electric Slots Feature Blade
Guides to Hold Knife at
Correct Sharpening Angle
Soft Grip Rubber Handle
for Comfort and Control
Non-Slip Rubber Base for Stability
PRODUCT FEATURES
HOW TO USE
Electric Sharpening
1. Clean all food or dirt off your blade. Never sharpen a dirty knife blade as this could cause the sharpener
to malfunction or damage to the sharpening wheel.
2. Insert the plug on the end of the power cord into a standard 120 volt electrical outlet. Connect the other
end of the power cord into the end of the sharpener.
3. Place the unit on a flat, sturdy surface and turn the unit ON by pressing the ON/OFF switch.
You will notice two sharpening slots for mechanical sharpening, one for each side of your blade.
Select the sharpening slot you would like to use first.
4. Hold the knife securely by the handle as you would in normal usage and position the heel of the blade
over the selected sharpening slot. Insert the blade into the upper portion of the sharpening slot then
rotate the handle of the knife down (slightly raising the tip of the blade) until the heel of the blade
contacts the sharpening wheel
(Fig. 1 on previous page).
As soon as contact is made and you hear
the distinctive grinding sound, pull the blade at a consistent speed through the sharpening slot using
light, downward pressure. To sharpen all the way out to the tip of the blade, lift up on the knife handle
slightly as the curved portion of the blade is drawn through the blade guides.
NOTE:
Due to some handle designs, you may not be
able to sharpen the entire length of the blade using the
mechanical sharpening wheel. Smith’s recommends us-
ing the manual sharpening slots in these limited cases.
CAUTION:
Always sharpen your knife blade from the heel to the tip of the blade.
Never insert the tip of the knife blade into the blade guide first or push your knife blade
through the sharpening slot. This could damage the knife sharpener and/or your knife.
(continued on other side)
Convenient Removable
Power Cord-
Not Rechargeable
Fig. 1
