Special Notes:
1. Check that all components are accounted for and undamaged before
assembling.
2. Please assemble product in a clean and dry area.
3. For larger units you may need another person to help assemble the product.
4. Clean the product with a mild cleaner and a damp cloth.
Components:
2.
Assembled 18” UXL Stack Chair
or
UXL
Nest & Fold Chair.
Tools:
1. M4 Allen Key
(Supplied)
2. Flathead Screwdriver
(*Not Supplied*)
3. Rubber Mallet
(*Not Supplied*)
1.
Arm Option;
a. Stack Chair Arm
b. Foldaway Tablet Arm
Notes:
If you have damaged or missing components or hardware
please contact customer service at 1-800-328-1061
Form # 1799_ _
Page 2 of 2
Rev. 07/2009
UXL 18” Stack Chair/Nest & Fold
Arm Attachment Directions
(1)
(2)
(3)
(4)
Step 1: Using the 4mm Allen Key, loosen the side screw completely.
Pop out the plastic cap/cover with a flathead screwdriver on
the side where the Arm will be placed.
Step 2: With the cap removed and the screw loosened completely,
slide the Arm into the empty socket and press firmly down
to seat the Arm. (In some cases a rubber mallet may be needed
to seat the Arm flush in the socket).
Step 3: With the Arm seated flush in the socket, use the 4mm Allen Key
to tighten the side screw completely. If attaching both Left &
Right Arms, repeat steps 1-3 for opposite Arm. Your UXL Chair
is now ready for use.
