Document #: 179679
REVISED: 01/2020
Assembly Instructions
1.
Lay top down on a clean smooth surface that will not harm the top finish. Underside of
top should be exposed.
Top is heavy, team lifting is advised.
2.
Position the support channel(s) onto the top, as shown. Do not attach support channel
to top yet. First attach the legs, one at a time, to the support channel(s) by using the
supplied
1/4”
-
20 x 3” bolts and 1/4”
-20 lock nuts.
Helpful Hint:
The nut goes on the inside; bolt head seen on the outside.
Helpful Hint:
Make sure legs are facing the right direction, as shown.
