For assistance in assembling product, missing or damaged parts, or to place an order, please contact
customer service at 1-800-328-1061. You may also place your order online at
Form#179984
www.smithsystem.com
11/2015
Assembly Instructions
Step 1:
Attach the
4” Dual-Wheel Casters
to the bottom of the
Library Columns
. Ensure
that the casters are fully tightened and secure. (If casters are not fully tightened,
the unit may get damaged or may not roll correctly)
Step 2:
Attach both
Library Spacer Supports
to the
Library Columns
using the connector
bolts and nuts from the hardware pack. The Nomad, at this point, should look
like the unit pictured below.
Step 3:
Mount one of the
Flat Top Brackets
(hook-side facing in) to the pre-drilled
End
Panel
using wood screws from the hardware pack. Hang the
End Panel
with the
attached
Flat Top Bracket
from the top of the
Library Column
. Attach the
Flat
Top Bracket
on the other side of the same
End Panel
. Hang the
Flat Bottom
Brackets
from the slots in the bottom of the
Library
Column. Fasten the
Flat
Bottom Brackets
to the
End Panel
with wood screws from the hardware pack.
Repeat the process for the other end of the Nomad. The Nomad, at this point,
should look like the unit pictured below.
