For Assistance in assembling product, missing or damaged parts,
or to place an order, please contact customer service at 800-328-1061
You may also place your order online at
www.smithsystem.com
Form# 179938
04/2013
Assembly Instructions
Step 1:
The leg stems are inserted into each of the 4 sockets of the
Plastic Box. The leg stem has a metal key which extends outward
slightly from the leg (Shown in Picture #1). The key must line up with
the slot on the plastic box.
**This step is crucial to leg installation.**
Step 2:
With the leg stem aligned to the hole as provided in Step, the
leg must be hammered into place. Use a brace between the leg and
the impact of the hammer to protect the leg tube.
(A wood block is shown.) (See Picture #2)
With all 4 leg stems hammered into place, reassemble the leg
Insert into the leg stem, and use the set screws to set the height.
(as shown in Picture #4) Your Table is now ready for use.
Picture #1
Step 3:
When the leg is fully set into place, the measurement
from the box to the top of the leg stem is 10 inches.
Picture #2
Picture #4
Picture #3
