Form# 179953A
08/2017
Assembly Instructions
Step 1
: Lay the top upside down, with the cut of the T-mold at the back and make sure the Laminate is
Face Down and the pre-drilled holes are facing upwards. Line up the Cascade Teacher Desk Leg with the
predrilled holes, and attach it to the top with the supplied wood screws.
Step 2
: Adjust the legs to the desired height by taking out the (4) ¼-20X1/2” Machine screws per leg and
reinserting them at the desired height.
Install (1) Tinnerman Clip per leg in the square hole located inside of the leg.
*NOTE: The Tinnerman Clip is only used if the desk is raised to a high range, when set to a low
range, threaded holes in the lower leg will be used instead of the Tinnerman Clip.
