Form# 179951
08/2017
Step 3:
Align the holes on the peds with the predrilled holes on the work surface and secure
using wood screws. Once the peds are attached to the top, fully tighten the machine screws
holding the modesty panel.
Hole placement for the Box Box File Ped is on the outside of the top plate of the ped.
Hole placement for the Tote ped is on the inside of the ped on the top plate. To attach the tote
ped to the top, you must remove the totes.
On the following page, there is a figure showing hole placement for the peds.
There are 4 more holes on the Box Box File Ped on the outside of the table and 3 on the back.
All holes to attach the ped to the top on the tote ped are on the inside of the ped.
Hole Placement
