If you have damaged or missing components, please contact customer service.
800-328-1061
Form # 179955
www.smithsystem.com
02/2013
Step 1:
On a clean flat surface, flip the top upside down
so that the pre-drilled holes are visible. Attach the leg
brackets and brace with the supplied wood screws.
Step 2:
Adjust the left and right leg to the desired
height by removing the 4 machine screws in each
leg and re-attach them securely (figure 2A). If a
high range is required, install the Tinnerman Clips
into the square openings (one per leg).
As Shown in figure 2B, attach the two legs to the
brackets using the large ¼-20 machine screws.
Do not tighten completely.
Figure 2A
Figure 2B
Step 3:
With legs assembled loosely, align
the modesty panel to the legs and attach
with machine screws. Finally, anchor the
modesty panel to the top with the supplied
wood screws.
Tighten all screw to finish.
