If you have damaged or missing components
please contact customer service.
Form# 179954
800-328-1061
02/2013
Step 2: Adjust the left and the right leg to the desired height by removing the 4 machine screws in each
leg and re-attach them securely (figure 2A). if a high range is required, install the Tinnerman Clips into
the square openings (one per leg). As shown in figures 2&2B, attach the two legs to the modesty panels
using the large 1/4-20 machine screws. Do not tighten completely.
Step 3: With the legs and the panels assembled loosely, align them with the pre-drilled holes and attach
them to the top with the supplied wood screws. Now tighten the machine screws between the legs and
the panels.
Step 4: Adjust the height of the center leg by loosening the two allen drive screws using the supplied hex
key and the ½” nuts. Pull upward on the lower leg section to the desired height and re-tighten the
hardware.
