Smith-Root UBC-24 User Manual Download Page 9

07292.13 UBC-24 Man

USER'S GUIDE

UBC-24

U N I V E R S A L   B A T T E R Y   C H A R G E R

www.smith-root.com

SPECIFICATIONS

Input Rating:

Nominal 90-264VAC/47-63Hz

Maximum Output Power:

60W

Load Regulation:

<200mV

Line Regulation:

<100mV

Switch Frequency:

≈40 kHz

Temperature Range:

-10°C to +40°C

Ripple:

<100mVp-p

Efficiency (At 100% 

Load):

80%

Insulation Class:

Class I

Electrical Safety:

UL 60601-1, EN 60601-1, EN 
60950, EN 60335-2-29

EMC Standards:

EN 60601-1-2 (Medical), EN 
61000-6-3 (Emission), EN 
61000-6-1 (Immunity)

Timer:

2hr 330% (also available with 
other values)

Input Connection:

3 pin IEC 320 (input cordset 
not included)

Output Connection:

Battery clips

Dimensions/Weight:

5.31” x 3.15” x 1.73” (135 x 80 x 
44mm)/ 0.77 lbs. (350g)

Items manufactured by companies other than Smith-Root carry 

the original manufacturer’s warranty. Please contact product 

manufacturer for return instructions.

All Smith-Root, Inc. manufactured products are covered by a one year warranty.  

Credit & Refund Policy:  Customers returning equipment, in new condition, will 

be given credit five days from the date of the return. A return authorization 

must accompany returns. Valid equipment returns include, but are not limited 

to, ordering incorrect equipment, funding deficits, and defective equipment 

returned for reimbursement. All returns are subject to a restocking fee and 

applicable shipping charges. The restocking fee is figured at 10% of the 

purchase price but not less than $20.00. Customers receiving equipment in 

damaged condition will be referred to the shipping company for insurance 

reimbursement.

07292.13 UBC-24 Manual - © 2015 Smith-Root, Inc. 

BATTERY CYCLE LOG

Use this form* to record the number of times a 
battery has been cycled:

DATE:

SERIAL #:

NOTES:

BATTERY CYCLE LOG

Use this form to record the number of times a 
battery has been cycled:

DATE:

SERIAL #:

NOTES:

BATTERY CYCLE LOG

Use this form to record the number of times a 
battery has been cycled:

DATE:

SERIAL #:

NOTES:

STORAGE INSTRUCTIONS

•  When not in use, store the charger indoors in 

a cool dry place, preferably with its original 
packing and carton.

•  Place these instructions with the charger 

during storage.

MAINTENANCE AND CLEANING

•  Very little maintenance is required other than 

protecting the charger from damage and 
weather.

•  Coil cord when not in use.
•  Clean case and cords with a slightly damp 

cloth.

•  Examine cords for damage periodically and re-

place if necessary with manufacturer approved 
parts.

BAT-01 BATTERY ANALYSIS TOOL

The Battery Analysis 
Tool is an accessory 
designed to oper-
ate with existing 
Smith-Root batter-
ies and chargers. Its 
purpose is to test 
back-pack Electro-
fisher batteries, and 
to demonstrate in a 
clear concise manner 
the amount of usable life remaining in batteries 
being tested.

CHARGING OTHER SMITH-
ROOT BATTERIES

The UBC-24 Battery Charger is designed to 
charge batteries for LR-Series Electrofisher Sys-
tems. However, users that have an inventory of 
older-style Smith-Root electrofisher batteries can 
charge them with the following adapters:
The 

Model 12 Battery to LR-Series Charger 

Adapter

 (#07458) will allow you to charge Model 

12 Batteries (#03298 & #02595) with the current 
model of UBC-24.
The 

LR-Series Battery to Model 12 Adapter Ca-

ble

 (#07459) will allow you to charge LR-Series 

lead-acid batteries with our older, Model 12 style 
BC-24 Battery Charger (#04954) with a 4-pin 
connector.
The 

Lithium Battery Adapter Cable

  (#10791)  al-

lows charging of 9.6Ah Lithium batteries with the 
UBC. It is supplied with each Lithium battery but 
is also available separately.

BAT-01

UBC-24

From AC

Battery

Under

Test

Bat-01 Hookup

BAT-01 Battery Analysis Tool ......... #08041

Model 12 Battery to LR-Series Charger ..07458
LR-Series Battery to Model 12 Charger ..07459
Lithium Battery Cable .................................. 10791

7

8

9

10

Phone: (360) 573-0202 • Email: [email protected]

Vancouver, WA USA

12Ah 24V

 

The 12 Amp-hour battery provides 
extended electrofishing time as 
compared to a standard 7Ah 
battery.

Weight ..........14.75 lbs.
Part # ................ 06682

7Ah 24V 

Our 7 Amp-hour battery comes 
standard with the LR-20 and LR-24 
electrofishers combos and provides 
a good balance between weight and 
power.

Weight .............10.3 lbs.
Part # ..............06681

24V 9.6AH

Our lithium iron phosphate  battery 
is half the weight of our lead-acid 
batteries, with a much higher 
recharge capacity.
LITHIUM BATTERY ADAPTER 
(10791) is included with each battery 
purchased.

Weight .............5.95 lbs.
Part # .............. 10765

SMITH-ROOT BATTERIES

We currently offer two lead-acid batteries for SRI 
Backpack Electrofishers. Both are 24 volt, sealed deep 
discharge-rated, lead acid batteries. 
Also available is our new lightweight lithium-iron phos-
phate battery.

To learn more about batteries, visit: 

www.smith-root.com/electrofishers/batteries

 or consult 

the instruction sheet supplied with your Smith-Root 
battery.

*To preserve the integrity of your UBC-24 instruction sheet, photocopy and print out this section for your own use.

Summary of Contents for UBC-24














Reviews: