background image

 

 

Page 2

Do not return sprayer to store, if you experience problems or have questions contact

our toll free Customer Service Center, M-F 8A.M. - 5P.M., EST, at 1-800-311-9903, or

e-mail: [email protected], or access online at: www.TheFountainheadGroup.com.

     WARNING

The sprayer is operated with liquid under pressure. Failure to observe caution and to follow instructions 

for operating and cleaning can cause tank, hose and other parts to be weakened and rupture under

pressure. This can result in serious injury from high pressure discharge of liquids or forcible ejection of 

parts. Do not use flammable materials in this sprayer. Material could ignite or explode, causing serious 

injury and/or possible death. For safe use of this product, you must read and follow all instructions before 

use. 

                            

TEST SPRAYER WITH WATER BEFORE USING ANY CHEMICALS.

      CAUTION

Always empty, clean and dry tank, pump system, shut-off, hose, and extension after each use. FAILURE TO 

DO SO MAY WEAKEN SPRAYER COMPONENTS, CAUSING COMPONENTS TO RUPTURE WHEN PRESSURIZED. 

Additionally, FAILURE TO CLEAN AND PROPERLY MAINTAIN YOUR SPRAYER WILL VOID MANUFACTURER’S 

WARRANTY.

      

WARNING

ALWAYS CLEAN THE SPRAYER AND SHUT-OFF THOROUGHLY AFTER EACH USE 

OR WHEN CHANGING APPLICATIONS AS DESCRIBED IN THE 

CLEANING

 SECTION.  

FAILURE TO COMPLETELY CLEAN MAY CAUSE CROSS-CONTAMINATION.

     SAFETY PRECAUTIONS

• Read owner’s manual completely before operating this sprayer.

• Always use goggles, gloves, and protective clothing when using sprayer. Refer to the appropriate 

  technical bulletin for the chemical being sprayed for additional protective clothing required.

• Read and follow all instructions and cautions on label, material safety data sheets and technical bulletins

  of products used in this sprayer.

• Never use flammable liquids, chlorine, bleach, caustics, acids, hot water, or other corrosive solutions or 

   heat, pressure or gas producing chemicals in the tank for the S103E Sprayer. 

• Do not leave sprayer in the sun when not in use.

• Spray when air is calm to prevent drift of chemicals.

• Do not use sprayer near open flame or anything that could cause ignition of the spray.

• Always inspect hose and all hose connections before each use. A damaged hose, or loose hose

  connection can result in unintended exposure to the pressurized chemical, resulting in serious injury or 

  property damage.

• Do not lift or carry sprayer by the hose, shut-off valve, or extension. Carry by pump handle only, 

  making sure handle is properly locked in place before lifting.

• Do not pressurize with any mechanical device such as an air compressor, since this can create a

  dangerous pressure level and bursting of parts resulting in serious injury. Only use original pump.

• Do not store chemicals in this tank.

• Always release pressure when sprayer is not in use and before removing pump from tank.

• Do not stand with face or body over top of tank when pumping or loosening pump, to prevent pump or 

  solution from striking you, resulting in serious injury.

• Clean and rinse sprayer thoroughly after each use.

• Never attempt to alter sprayer from original condition.

• Always use replacement parts from original manufacturer.

• Keep the sprayer and all chemicals out of the reach of children.

Summary of Contents for 190448





























Reviews: