9
10
smithandnoble .com
800 .248 .8888
STEP 5 - SECURING ROD TO BRACKETS
STEP 4 - ATTACHING THE FINIALS & RINGS
Once the rod has been placed on the
brackets, secure the rod in place by
tightening the bracket set screw with
the allen wrench provided .
Please note: If your rod set comes with
bypass center support brackets these
do not have a set screw . Just rest the
rod on the bracket for support .
Continue by attaching the middle rod
to the elbow on the left side
(3)
and
tightening the set screw on the elbow .
Place the required number of rings on
the rod, and then cap the opposite
end with the other elbow and attach it
using the set screw
(4)
.
When placing the rod on the bracket,
if drapery is opening from the center,
leave one ring between the finial/
elbow and bracket on each side . If the
drapery is opening from one side only,
put the ring between the finial/elbow
and the bracket on the opposite side of
where you are opening from
(2)
. This
will prevent drapery to be pulled all
the way to one side or the other when
opening and closing it .
Attach the finial to one end of the
3rd rod by sliding it on and attaching
it using the set screw
(5)
. Place the
required number of rings on the rod,
and then cap the opposite end with the
elbow attached to the middle rod and
attach it using the set screw .
When placing the rod on the bracket,
if drapery is opening from the center,
leave one ring between the finial/elbow
and bracket on each side . If the drapery
is opening from one side only, put the
ring between the finial/elbow and the
bracket on the opposite side of where
you are opening from
(2)
. This will
prevent drapery to be pulled all the way
to one side or the other when opening
and closing it .
For treatments without rings
Attach the finial to one end of the rod by
sliding it on and attaching it using the set
screw
(1)
. Position the drapery panels on
rod, and then cap the opposite end with
the elbow
(3)
.
Position the drapery panels on the
middle rod, and then cap the Left end
with the elbow attached to the left rod
using the set screw on the elbow
(3)
.
Attach the finial to one end of the 3rd
rod by sliding it on and attaching it using
the set screw
(5)
. Position the drapery
panels on rod, and then cap the opposite
end with the elbow on the middle rod
using the set screw on the elbow .
1
3
4
5
TIGHTEN
SET SCREW
TIGHTEN
SET SCREW
BYPASS SUPPORT
BRACKET
