3
4
smithandnoble.com
800.248.8888
STEP 1 - GETTING STARTED
OVERVIEW
Heavy Duty Wall Mount Single Rod Set
Before you begin, check the accompanying diagram to make sure you have all the parts you need.
You’ll need to make sure the surface you intend to install your hardware is sturdy enough to
accommodate the brackets. If you’re screwing directly into a surface this means locating wood
studs that are strong enough to securely bond with the
included screws. Otherwise, you’ll need to use a secure
fastener (as illustrated) but please note this piece is not
included.
WALLBOARD OR PLASTER:
Hollow wall applications: Use a secure fastener designed
specifically for this purpose.
METAL:
Prepare by pre-drilling holes and then using the included screws.
CONCRETE, STONE, BRICK OR TILE:
Use a masonry drill and surface-specific plugs, anchors, or
screws. When selecting a fastener be sure it’s designed to support the weight of the product being
installed (if you’re not sure, either give us a call or ask a professional at your local hardware store).
Once obtained, follow the fastener manufacturer’s instructions regarding proper installation.
TOOLS YOU WILL NEED TO INSTALL YOUR HARDWARE:
Pencil, screwdriver,
¼
" nut driver,
level, and a drill with a
7
⁄
64
"
drill bit.
Note: It’s important to monitor the amount of pressure you apply when using a drill. If the screws
are too tight this may cause the screw itself to break off in the wall or window frame.
Parts & Tools
MOLLY
BOLT
SELF DRILLING
ANCHOR
TOGGLE
BOLT
SCREWS
SPLICE CLIP
MOUNTING BRACKET
ROD CONNECTOR
(OPTIONAL)
CARRIERS
CENTER SPLICE BRACKET
SCREWDRIVER & PENCIL
(NOT INCLUDED)
POWER DRILL
(NOT INCLUDED)
LEVEL
(NOT INCLUDED)
ROD QTY
BRACKET QTY
ROD WIDTH
1
2
24"— 60"
1
3
601⁄
8
"—96"
2
5
961⁄
8
"—168"
2
7
1681⁄
8
"—192"
3
7
1921⁄
8
"—264"
3
9
2641⁄
8
"—276"
3
10
2761⁄
8
"—288"
4
11
2881⁄
8
"—360"
4
13
3601⁄
8
"—384"
FINIAL
(OPTIONAL)
MASTER
CARRIER
CARRIERS
FINIAL
MOUNTING
BRACKET
OUTSIDE
POST
INSIDE
POST
MOUNTING
PLATE
COVER
PLATE
HEX
BOLT
HEX
BOLT
