7
8
smithandnoble.com
800.248.8888
Front Rod
Your track rod will come with all master
carriers and regular carriers pre-
installed.
If you need to add or take out some
carriers depending on your drapery,
unscrew the End Cap from the rod.
Remove the carrier & end stop and
either add or take out the carriers
needed.
SPLIT DRAPERY (A)
Once all carriers have been placed in
the track, for split drapery, place end
stop in between the first carrier from
each end and the second carrier so
end of drape does not move when
drape is closed.
ONE WAY DRAW DRAPERY (B)
For one way draw drapery, place
end stop in between the first carrier
from the end
and the second carrier
of the side you won’t be opening it
from so the end of drape does not
move when drape is closed.
Place another end stop right before
the beginning of the end cap to
prevent the master carrier from
moving all the way to the end.
STEP 3 - ATTACHING THE ROD CONNECTOR
STEP 4 - ADDING OR REMOVING CARRIERS
END STOP
BACK
CARRIERS ONLY
FRONT
OR BACK CARRIERS
ROD
CONNECTOR
ROD CONNECTER
ROD
SPLICER
FIGURE A
FIGURE B
ROD SPLICER
Depending on your order, you may
have received a rod connector.
A rod connector is the short piece of
metal placed inside each end of the
rods in a multi-segment system to
join them together.
For rods shorter than 156"
(see figure
A)
,
and for longer than 156"
(see figure
B)
.
Join track sections together and
fasten securely with set screws.
Attach mounting clip at splice by
pressing clip down and snapping it
to track,
(see figure C)
.
A) Split Draw
End stop & Carrier positions
END STOP
END CAP
FRONT ROD
FINIAL
MASTER CARRIER
ROD
B) One Way Draw
End stop & Carrier positions
END STOP
END CAP
MASTER CARRIER
FRONT ROD
FINIAL
ROD
CARRIER
FRONT ROD
FINIAL
ROD
END
CAP
FIGURE C
ROD
SPLICE
MOUNTING
CLIP
