5
What to do if something goes wrong?
Many common issues with your wine cellar can be solved very easily. Try the troubleshooting tips
below should you experience any problems.
PROBLEM
POSSIBLE CAUSE
Appliance does not operate.
Not plugged in.
The appliance is turned off.
The circuit breaker tripped or a fuse has blown
out.
Appliance is not cold enough.
Check the temperature control setting.
External environment may require a higher
setting. (e.g. room needs to be air conditioned)
The door is opened too often.
The door is not closed completely.
The door gasket is not sealing properly.
Appliance is turning on and off frequently.
The room temperature is hotter than normal.
The door is opened too often.
The door is not closed completely.
The temperature control is not set correctly.
The door gasket does not seal properly.
Your wine or beverage cooler is empty. Load
with bottles or cans and the temperature will
stabilize in about a day.
The light does not work.
Not plugged in.
The circuit breaker tripped or a fuse has blown.
The light bulb has burned out.
The light button is “OFF”.
Vibrations.
Check to assure that the wine cellar is on a level
surface.
The appliance seems to make too much
noise.
Contraction and expansion of the inside walls
may cause popping and crackling noises.
The appliance is not on a level surface.
The door will not close properly.
The appliance is not on a level surface.
The door was reversed and not properly
installed.
The gasket is dirty.
The shelves are out of position.
