10
1. Pry up the hinge cover (1) and hinge cap (2) using a flat head screwdriver. Using a Phillips head
screwdriver, loosen the hinge screws (3a) and remove the top hinge (4). You can now lift the door (5) off the bottom
hinge and set it off to one side. Be careful not to lose the washer (11) between the bottom hinge and the door. You will
need this later. Also remove lock hole cap (6) and screws (7) and (8) from the top of the door. The lock cap can be pried
up using a small flat head screwdriver.
2. Using a Phillips head screwdriver, loosen screws (3b) to remove the hinge support rod (9) at the bottom of the door.
Rotate the door 180
O
so that the top is now the bottom and vice versa. Attach the bottom hinge support rod (9) to the
bottom corner of the door and attach with screws (3b).
3. Using a flat head screwdriver, pry off the bottom hinge cover (12). Using a Phillips head screwdriver, loosen and remove
screws (3c) and (13) and bottom hinge (10).
4. Move bottom hinge (10) to the opposite side and re-insert all screws (3c) and (8). Bottom hinge cover (12) should clip
back onto the bottom hinge (10).
5. Place the washer (11) over the hinge support rod (9) and place the door back on the bottom hinge by aligning the hinge
support rod (9) with outer hinge hole on the bottom hinge (10).
6. Re-attach top hinge (4) using screws (3a). Insert lock cap (6), screws (7) and (8), and clip on hinge cap (2).
Stainless steel doors include a handle centered in the middle of the door. There is no need to alter the location of the handle.
Glass doors include integrated door pull handles. There is no need to alter the location of door pull handles.
