POSYC 3303 industrial PC
Installation, use and maintenance manual - EN
Ver. 1.02
20
6.4 Ethernet connectors
With the operating system loaded on the KE050087 memory card supplied, the two Ethernet ports ETH1 and
ETH2 have different functions.
Use the ETH1 connector if you want to connect the Posyc to the local network.
Use the ETH2 connector if you want to connect the Posyc to the “Marts o MST” device.
Each of the two Ethernet ports has two LEDs. The first, marked by the letter S, indicates the communication
speed of the port involved. It is a two-color LED (green / orange); according to the speed at which the Ethernet
port is communicating, the LED takes on a different color. The second, orange, marked by the letter A, indicates
the state of activity of the door itself, or if the door is connected or if it is communicating.
6.4.1 LED behavior for signaling of communication speed
6.4.2 LED behavior for signaling connection and communication activities
Name
State
Function
S
OFF
Ethernet port communicating at a speed equal to 10 Mbps
S
ON (green LED)
Ethernet port communicating at a speed equal to 100 Mbps
S
ON (orange LED)
Ethernet port communicating at a speed equal to 1 Gbps
Name
State
Function
A
OFF
Ethernet port not connected
A
ON (orange LED)
Ethernet port connected
A
BLINK OFF (orange LED)
Ethernet port communicating
S
A
S
A
Port 1 (ETH1)
Port 2 (ETH2)
