IR lamp control module - HELCON 11XX series -
Installation, use and maintenance manual - EN
Ver. 1.02
23
5.3.4 24VDC power supply - J5 connector
The J5 connector (4 poles, 90 ° female type M12, A-coded; manufacturer: Phoenix Contact, code 1436564)
makes the output of the external 24V DC power supply available.
The pinout of the connector is shown in the following image:
The 24VDC output supplied by the J5 connector is used to eventually connect other modules installed in the
ring. A maximum of 8 HELCON modules can be connected in cascade.
24VDC
Marking
Signal
1
24V
2
24V
3
GND
4
GND
5
NC
1
2
3
4
5
Polarization
