6
4.0
UNPACKING YOUR SAMBA HILO SEATING SYSTEM
STOP!
If in any doubt, ALWAYS seek ADVICE.
Always turn hand wheels, levers and screws clockwise to tighten or anti-
clockwise to loosen.
§
When delivered, the product will be supplied fully assembled, with the exception of the
fitment of the additional accessories.
§
If your order has been supplied as a custom kit, please ensure you follow both the
instructions documented in this IFU and any additional instructions supplied.
§
Also supplied will be a ‘S-Key’ with 4mm hex ends.
§
Refer to Section 5.0 for details of how to fit and adjust your accessories prior to use.
§
Please take note of any instructions on the packaging/box when unpacking.
§
Once the chair has been carefully unpacked, please check all parts.
§
NOTE: For powered Samba chairs. The battery has been tested and fully charged prior to
leaving our factory but MUST BE CHARGED for 24Hours before use upon receipt. To
ensure maximum battery life is achieved, it is recommended that the battery is kept fully
charged. The battery is charged by plugging the charging unit into the handset and
connecting the charger unit to a mains power socket. The control box is fitted with a red
emergency stop button – this must be fully pulled out in order to charge and adjust the
chair height.
STOP!
If you believe this product to be faulty – DO NOT USE
Contact: Smirthwaite Ltd
T:
+44 (0)1626 835552
F:
+44 (0)1626 835428
E:
