4
5.0 SETTING UP AND ADJUSTING YOUR PRODUCT
STOP!
If in any doubt, ALWAYS seek ADVICE.
Always turn handwheels, levers and screws clockwise to tighten or
anti-clockwise to loosen.
5.1 TABLE HEIGHT
The table height can be adjusted to suit the client’s needs, and to promote correct
sitting posture with feet flat to the floor, wherever possible.
Use
the
hexagonal
key
supplied to remove the screws
(A) on each of the leg frames .
The leg outrigger (B) can now
be positioned at the desired
height setting.
Re-insert the screws (A) and
tighten.
Repeat for the three other leg
outriggers.
Ensure the table is level
before use.
Ensure all screws are secure
before use.
5.2 TABLE CONFIGURATIONS
B
A
