15
TECHNICAL SPECIFICATION
5.2 Environmental - Storage and Operating Conditions
The Changing Bench is intended for internal use within normal environmental conditions.
It is not intended to be used in environments where there are rapid changes in the environmental
temperature and humidity during intended use.
The Mobi Changer suffers little from any effects of lint, dust and light.
•
Lint – Due to there being no mechanical or electrical mechanisms on the Mobi
Changer, lint would not affect the Changing Bench working.
•
Dust – Due to there being no mechanical or electrical mechanisms on the Mobi
Changer, dust would not affect the Changing Bench working.
•
Light –The Specification of the Changing Bench dictates that normal use would
occur during ambient luminance 50 – 500 lux. Additionally, as the Changing
Bench is designed for indoor use only, if required the user may wish to switch
on room lighting.
Normal operating conditions
+5°C to +40°C (41°F to 104°F) at a relative humidity between 15% to 90% RH, non-condensing
but not requiring a water vapour pressure greater than 50hPa and atmospheric pressure between
700hPa to 1060hPa
Shipping and storage conditions
-25°C to +5°C (-13ºF to 41ºF) with any humidity level
+5°C to +35°C (41°F to 95°F) at a relative humidity up to 90%,
+35°C to 70°C non-condensing at a water vapour pressure up to 50hPa
During all transportation it is recommended that the Changing Bench remains in its original
packaging.
It is recommended that the Changing Bench is stored in a cool, dry place out of direct sunlight. If
cleaning is required after storage, please see section 7.0 Cleaning of the user manual for
instructions.
Shipping and storage conditions are also contained on Mobi Changer Box Label:
