Operator’s Manual
HP50GC Pellet Stove
~ 21 ~
BECOMING FAMILIAR WITH YOUR
CONTROLLER
Figure 17: Control pad key
CONTROLLER BUTTONS (SEE FIGURE 17)
1.Infrared Receiver: Receives signal from remote control. (Available
separately)
2.Power Indicator - Illuminates when the main power switch is on.
3.Alarm Light - Illuminates if stove is not operating properly.
4.On/Of Button - Starts and stops operation of stove.
5.Timer Button - Allows you to choose the start time or shutdown time
of the unit.
6.Mode Transfer Button - Allows you to set the unit to one of three
main mode settings: Manual, Temp, and Weekly
7.Hold Button - Pressing the
“
Hold
”
button in weekly mode after
raising the Call To temperature will maintain that temperature until the
button is pressed again or the stove
is shut down
8.Scroll Up Button - Allows you to scroll up to choose items in the
menu.
9.Exit Button: Takes you out of current selection and returns to
previous option and/or screen. When entering data, pressing the EXIT
button will also delete your entries
10.Scroll Down Button - Allows you to scroll down to choose items in
the menu.
11.Enter Button -Pressing “Enter” button allows you to adjust and
select data on the screen. Pressing the ENTER button for two
seconds will take you to a main menu screen in which you
’
ll have the
ability to change the time, date, temperature display,
weekly
operation schedule (for Weekly Mode only) and combustion
motor and voltage settings
Figure 18: Control pad location