User instructions
32
CLEANING THE FILTER UNIT
•
The central filter
H
should be inspected regularly and cleaned if necessary. To remove it, take
hold of the handle, turn anti-clockwise and lift.
•
Press the central filter
H
from below to extract it from the micro-filter.
•
Separate the two parts of the plastic filter by pressing the body of the filter in the zone shown
by the arrows.
•
Remove the central filter by lifting it.
GENERAL WARNINGS AND RECOMMENDATIONS FOR CORRECT MAINTENANCE:
•
The filters should be cleaned
under running water
using a stiff brush.
•
It is essential to
thoroughly clean the filters
according to the above instructions: the
dishwasher cannot function if the filters are clogged.
•
Carefully replace
the filters in their seats, to avoid damaging the wash pump.
PROLONGED DISUSE:
•
Run the soak program twice in succession.
•
Unplug
the power cord from the socket.
•
Leave the door slightly open
, in order to prevent the formation of unpleasant odours inside
the washing tank.
•
Fill the rinse aid dispenser
.
•
Shut off the water supply tap.
BEFORE STARTING THE DISHWASHER AFTER PROLONGED DISUSE:
•
Check that there are no deposits of sludge or rust inside the water pipe: if there are, allow the
water to run from the water supply tap for a few minutes.
•
Plug the power cord
back into the socket.
•
Reconnect the water intake hose and open the tap again.
