225199
• Insert the
fi
lter back as shown on the picture (arrow and
pointer), and tighten by turning it in clockwise direction. To
ensure good sealing the gasket surface (A) must be dirt free.
The washing machine automatically monitors the execution of particular functions during the
operation, and reports any detected failures. In such cases both signal LED’s start
fl
ashing in
certain sequence, accompanied by the audible signal, sounding in the same sequence as the
indicator LED’s
fl
ash. The
fl
ashing sequence changes in accordance with the nature of the
detected failure.
In some cases you may attempt removing certain failures yourself, so count the number of
fl
ashes,
repeating after certain pauses.
The machine signals failures immediately after detecting them and stops the program, except for
heater failure, where the machine completes the washing program without heating water.
Failures
In certain cases you may remove the failure yourself:
2 - two
fl
ashes: door is not correctly closed
3 - three
fl
ashes: inappropriate water intake
7 - seven
fl
ashes: inappropriate water outlet.
In all other instances mark the number of
fl
ashes indicating the failure, switch off the machine and
call nearest authorized service center (LED’s continue
fl
ashing until you switch the machine off).
Interferences from the ambient (for example electrical wiring) could induce signalization of different
faults. In such cases:
- switch the appliance off, and wait for a few seconds;
- switch the appliance back on and repeat the washing program.
If the fault repeats, call authorized service shop.
Warranty shall not apply in case of failures due to interferences from the environment (lightning
stroke, power supply circuit faults, natural disasters).
20
Failures
