background image

50 / EN

Washing Machine / User’s Manual 

Changing the auxiliary function, speed and temperature

Depending on the step the programme has reached, you can cancel or activate the auxiliary functions. See, 

"Auxiliary function selection". 

You can also change the speed and temperature settings. See, "Spin speed selection" and "Temperature 

selection".

C

The loading door will not open if the water temperature in the machine is high or the water level is above the door opening.

4.3.13 Child Lock

Use Child Lock function to prevent children from tampering with the machine. Thus you can avoid any changes 

in a running programme.

C

You can switch on and off the machine with On / Off button when the Child Lock is active. When you switch on the machine 

again, programme will resume from where it has stopped.

When the child lock is enabled, an audio warning will be given if the buttons are pressed. Audio warning will be canceled if the 

buttons are pressed 5 times consecutively. 

To activate the Child Lock:

Press and hold

 Auxiliary Function button 2

 for 3 seconds. After the countdown as “

CL 3-2-1

" on the 

display is over, "CL On" appears on the display. Release 

2nd Auxiliary Function button 

when this warning is 

displayed.

To deactivate the childproof lock:

Press and hold 

Auxiliary Function 

button 2 for 3 seconds. After the countdown as 

“CL 3-2-1”

 on the display 

is over, "CL On" disappears from the display.

4.3.14 Cancelling the programme

The programme is cancelled when the machine is turned off and on again. Press and hold 

On / Off

 button for 

3 seconds. After the countdown as "3-2-1" on the display is over, the machine turns off.

C

If you press On / Off button when the Child Lock is enabled, the programme will not be cancelled. You should cancel the Child 

Lock first. 

If you want to open the loading door after you have cancelled the programme but it is not possible to open the loading 

door since the water level in the machine is above the loading door opening, then turn the Programme Selection knob to 
Pump+Spin programme and discharge the water in the machine.

Summary of Contents for WHT812LSIT






























Reviews: