22 / EN
Washing Machine / User’s Manual
4.3.14 Cancelling the programme
The programme is cancelled when the machine is turned off and on again. Press and hold
On / Off
button for
3 seconds. After the countdown as "3-2-1" on the display is over, the machine turns off.
C
If you press On / Off button when the Child Lock is enabled, the programme will not be cancelled. You should cancel the
Child Lock first.
If you want to open the loading door after you have cancelled the programme but it is not possible to open the loading
door since the water level in the machine is above the loading door opening, then turn the Programme Selection knob to
Pump+Spin programme and discharge the water in the machine.
4.3.15 End of programme
End symbol appears on the display when the programme is completed.
If you do not press any button for 10 minutes, the machine will switch to OFF mode. Display and all indicators
are turned off.
Completed programme steps will be displayed if you press On / Off button.
4.3.16 Adjusting the VOLUME level
Low volume and high volume
Press and hold Auxiliary Function button 3 for 3 seconds to adjust the volume level. After the countdown as
"3-2-1" on the display is over, the volume level symbol will appear and the new volume level will be displayed.
4.3.17 Load level indicator
• The amount of loaded laundry is measured when the loading door is open and the Load indicator shows the
amount.
• This information disappears when the loading door is closed.
• During initial operation, “max” can flash on the screen although you have not loaded enough amount of
laundry or the machine may measure less although you have loaded to max level. This is quite normal. Start
the machine with the selected programme. Load sensor will calibrate itself automatically and the load level
will be displayed correctly during the next loading operation.
88
1888
88:88
C
0
88
1888
88:88
C
0
88
1888
88:88
C
0
88
1888
88:88
C
0
Machine is empty.
Machine load level is too low for the selected programme.
Machine is half loaded for the selected programme.
Machine is fully loaded for the selected programme.
