11
EN
Use
6)
If needed, select the additional functions
Defrost (
10 - Fig. B
) or Bagel (
14 - Fig. B
)
or the two combined.
7)
The heating element is now activated.
The bread will be centered in the
breadlift automatically for toasting.
8)
The toasted bread will pop up
automatically when the toast is ready.
9)
If the toast is not brown enough and
requires just a little extra time, use the
reheat button to extend the toasting time.
3.3 Special functions
Canceling/stopping the toasting cycle
At any time, it is possible to cancel or stop
the toasting cycle by pushing the button
(
13 - Fig. B
).
Defrost
(
10 - Fig. B
)
This function gently defrosts frozen bread
and toasts it to the selected browning level.
To activate it, insert the bread into the slot,
select the desired browning level, press the
breadlift down until it clicks, then push the
defrost button, which will light up. Toasting
time will be automatically increased to allow
the bread to defrost and brown correctly.
When the toast pops up automatically, the
light of the defrost button will switch off.
Bagel
(
14 - Fig. B
)
This special function is ideal for toasting one
side only, for bagels, flat bread, English
muffins, baguettes, etc. To use the function,
simply insert the bread into the slot with the
side that you want toasted facing the outside.
Select the desired browning level, press the
breadlift down until it clicks, then push the
Bagel function button, which will light up.
Tips and suggestions
• The first batch of toast you make
enables the heating elements
to reach the correct toasting
temperature. Please note that
further batches of toast could
take less time.
For best results:
• Toast only one type of bread at
a time.
• Toast bread slices of the same
thickness.
• Use bread slices no thicker than
one inch.
• If you are using handcut bread,
try to cut slices as evenly as
possible. Uneven slices will toast
unevenly.
• Be aware that if you use very thin
or broken slices of bread, they
will burn.
3.2 Operation
If necessary, shorten the cord by wrapping it
under the base (
5 - Fig. A
).
1)
Plug in the toaster.
2)
Insert the bread in the slot (
Fig. C
).
3)
Remember that as bread is not normally
square, you may need to turn the bread
on its side to get a better fit and optimize
the toasting surface area.
4)
Choose the desired browning level
(Browning levels 1 to 6, from light
to dark) or the “Reheat function”
(
15 - Fig. B
).
5)
Push the lever down until it clicks to
activate the toasting cycle (
Fig. C
).
