manualshive.com logo in svg

Smeg TR103I, Original Instructions Manual, Page: 5 / 50

Share
Download
Smeg TR103I Original Instructions Manual Download Page 5

Instructions

57

EN

•  If any liquid does boil over or spill, 

remove the excess from the hob.

•  Take care not to spill acid 

substances such as lemon juice or 
vinegar on the hob.

•  Do not put empty pans or frying 

pans on switched on cooking 
zones.

•  Do not use steam jets to clean the 

appliance.

•  Do not use rough or abrasive 

materials or sharp metal scrapers.

•  Do not use cleaning products 

containing chlorine, ammonia or 
bleach on parts made of steel or 
that have metallic surface finishes 
(e.g. anodizing, nickel- or 
chromium-plating).

•  Do not use abrasive or corrosive 

detergents (e.g. scouring 
powders, stain removers and 
metallic sponges) on glass parts.

•  Do not wash the removable 

components such as the hob grids, 
flame-spreader crowns and 
burner caps in a dishwasher.

Installation

•  This appliance 

must not be 

installed

 in a boat or caravan.

•  This appliance must not be 

installed on a pedestal.

•  Position the appliance into the 

cabinet cutout with the help of a 
second person.

•  Never use the oven door to lever 

the appliance into place when 
fitting.

•  Avoid exerting too much pressure 

on the door when open.

•  Do not use the handle to lift or 

move this appliance.

•  To prevent any possible 

overheating, the appliance should 
not be installed behind a 
decoration door or a panel.

•  Have the electrical connection 

performed by authorised 
technicians.

•  The appliance must be connected 

to ground in compliance with 
electrical system safety standards.

Summary of Contents for TR103I



















































Reviews:

No comments