background image

Use

21

EN

3.5 Cooking advice

General advice

•  Use a fan assisted function to achieve 

consistent cooking at several levels.

•  It is not possible to shorten cooking times 

by increasing the temperature (the food 
could be overcooked on the outside and 
undercooked on the inside).

Advice for cooking meat

•  Cooking times vary according to the 

thickness and quality of the food and to 
consumer taste.

•  Use a meat thermometer when roasting 

meat, or simply press on the roast with a 
spoon. If it is hard, it is ready; If not, it 
needs another few minutes cooking.

Advice for cooking with the Grill and the 
Fan with grill

•  Meat can be grilled even when it is put 

into the cold oven or into the preheated 
oven if you wish to change the effect of 
the cooking.

•  With the Fan with grill function, we 

recommend that you preheat the oven 
before grilling.

•  We recommend placing the food at the 

centre of the rack.

•  With the Grill function, we recommend 

that you turn the temperature knob to the 

maximum value near the symbol 

  to 

optimise cooking.

•  Foods should be seasoned before 

cooking. Foods should also be coated 
with oil or melted butter before cooking.

•  Use the oven tray on the first bottom shelf 

to collect liquids produced by grilling.

Advice for cooking desserts/pastries and 
biscuits

•  Use dark metal moulds: They help to 

absorb the heat better.

•  The temperature and the cooking time 

depend on the quality and consistency 
of the dough.

•  To check whether the dessert is cooked 

right through: At the end of the cooking 
time, put a toothpick into the highest point 
of the dessert. If the dough does not stick 
to the toothpick, the dessert is cooked.

•  If the dessert collapses when it comes 

out of the oven, on the next occasion 
reduce the set temperature by about 
10°C, selecting a longer cooking time if 
necessary.

•  While cooking desserts or vegetables, 

excessive condensation may form on the 
glass. In order to avoid this, open the 
door very carefully a couple of times 
while cooking.

Advice for defrosting and proving

•  Place frozen foods without their 

packaging in a lidless container on the 
first shelf of the oven.

•  Avoid overlapping the food.
•  To defrost meat, use the rack placed on 

the second level and a tray on the first 
level. In this way, the liquid from the 
defrosting food drains away from the 
food.

•  The most delicate parts can be covered 

with aluminium foil.

•  For successful proving, a container of 

water should be placed in the bottom of 
the oven.

Summary of Contents for SUK91MBL9















































Reviews: