User instructions
20
To add rinse aid:
x
Open the door.
x
Open the door
S
.
x
Add the rinse aid until the container
is full (approximately 140 cc).
x
The optical level indicator
O
on the
side of the cap should be
completely obscured. Refill the rinse
aid when the optical level indicator
becomes clear again, or when the
rinse aid warning light illuminates.
x
Close the door
S
.
x
Use a cloth to remove any spillage of rinse aid which might lead to
the formation of excess foam.
ADJUSTING THE RINSE AID DISPENSER SETTING
The dishwasher is factory set for medium water hardness. However it
possible to change the setting by turning the dispenser’s selector to the
desired position: the amount of rinse aid dispensed is proportional to the
selector position.
x
The amount of rinse aid must be
increased
if the washed dishes
appear dull or feature circular stains.
x
If, on the other hand, the dishes are sticky or have white streaks, it
is necessary to
reduce
the rinse aid setting.
Summary of Contents for STO900
Page 1: ...INSTRUCTION MANUAL...
Page 34: ......
