User instructions
32
5. Cleaning and maintenance
Before carrying out any work, always unplug the appliance from the
electrical supply or switch off the all-pole disconnection device.
5.1 General warnings and recommendations
Avoid the use of acidic or abrasive detergents.
Clean the outer surfaces and door-lining of the dishwasher regularly
using a soft cloth moistened with water or with a normal detergent
suitable for painted surfaces. Clean the door gaskets with a damp
sponge. Periodically (once or twice a year) it is advisable to clean the
tank and gaskets, using a soft cloth and water to remove any deposits.
CLEANING THE WATER INTAKE FILTER
The water intake filter
A
located at the outlet of the water supply tap
needs to be cleaned periodically.
After having closed the water supply tap, unscrew the end of the water
intake hose, remove the filter
A
and clean it delicately under running
water. Reassemble filter
A
in its seat and carefully screw the water
intake hose back into position.
CLEANING THE SPRAY ARMS
The spray arms can be easily removed for periodic cleaning of the
nozzles, to prevent possible clogging. Wash them under running water
and carefully replace them in their seats,
checking that their rotary
movement is in no way impeded
.
•
To remove the
upper
spray arm, unscrew locking ring
R
.
•
To remove the
lower
spray arm, simply lift it up, pulling by the
central part.
•
To remove the
orbital
spray arm assembly, take hold of the longer
arm and pull the orbital unit upward. Wash the arms under a jet of
running water and return them carefully to their seat.
After
reassembly, check that the spray arms turn freely.
Otherwise,
check that they have been installed correctly.
ORBITAL
Summary of Contents for STL827A
Page 1: ...INSTRUCTION MANUAL GUIDE FOR USING THE DISHWASHER AND THE WASHING PROGRAMS...
Page 46: ......
Page 47: ...Fig 2 Fig 3 Quota B Fig 1a Fig 1b...
Page 51: ...Fig 19 Fig 20 Fig 21...
