background image

2. Press and hold   until the appliance

is activated.

3. Fill the salt container if it is empty.

4. Fill the rinse aid dispenser if it is

empty.

5. Load the baskets.

6. Add the detergent.

7. Select and start a programme.

8. Close the water tap when the

programme is complete.

Using the detergent

B

C

A

CAUTION! Only use detergent

designed specifically for

dishwashers.

1. Press the release button (B) to open

the lid (C).

2. Put the detergent in the compartment

(A). You can use detergent in tablets,

powder or gel.

3. If the programme has a prewash

phase, put a small quantity of

detergent on the inner part of the

appliance door.

4. Close the lid. Make sure that the lid

locks into position.

For information about the

detergent dosage, refer to the

manufacturer's instructions on

the packaging of the product.

Usually, 20 - 25 ml of gel

detergent is adequate for

washing a load with normal

soil.

Do not fill the compartment (A)

with more than 30 ml of gel

detergent.

How to select and start a

programme

1. Press the button dedicated to the

programme you want to set.

• The light related to the button is on.

• The display shows the programme

duration.

2. Activate applicable options if desired.

3. Close the appliance door to start the

programme.

How to select and start the

programme 

1. To select  , press and hold 

 for 3

seconds.

• The light related to the button is on.

• The display shows the programme

duration.

2. Close the appliance door to start the

programme.

How to activate options

1. Select a programme.

2. Press the button dedicated to the

option you want to activate.

• The light related to the button is on.

• The display shows the updated

programme duration.

By default, options must be

activated every time before you

start a programme.

If the latest programme

selection is enabled, the saved

options are activated

automatically along with the

programme.

It is not possible to activate or

deactivate options while a

programme is running.

Not all options are compatible

with each other.

Activating options often

increases the water and energy

consumption as well as the

programme duration.

16

Summary of Contents for ST4523IN





























Reviews: