Smeg SIM592B Instructions For Use & Warranty Download Page 8

EN17

Connect the yellow/green earth wire to the terminal with the symbol 

.

This wire must be longer than the other wires.
1.

Remove the terminal block cover (A), undoing the screw and inserting the cover in the terminal block hinge (B).

2.

Strip approx. 70 mm of sheath from the power supply cable. 

3.

Strip approx. 10mm of sheath from the conductors. Insert the power cable in the cable clamp and connect the wires to the terminal block as indicated in the 
connection diagram located near it.

4.

Secure the power cable with the cable clamp.

5.

Close the cover (C) and screw it on the terminal block with the previously removed screw.

Each time the power is connected, the hob performs an automatic check for a few seconds.
Connect the appliance to the power supply by means of a multipole switch with minimum contact gap of 3mm.

Control Panel Description

The panel has touch controls: to use them, just press the corresponding symbol (a light touch is sufficient).

First use / after a power failure

After connecting the hob to the electrical power supply, the control panel is locked (the indicator light above the key is ON).

To unlock the control panel, press and hold the 

 key for 3 seconds. The indicator light switches off and the hob can be used normally.

Switching the hob On/Off

To switch the hob on, press and hold the 

 key for approx. 2 seconds: the indicator light above the key switches on and dashes appear inside the circles indicating 

the cooking zones.
To switch off, press the same button until the hob switches off. All the cooking zones are deactivated

Wires

Number x size

220-240 V ~ + 

3 x 4 mm

2

220-240 V 3 ~ + 

4 x 1.5 mm

2

380-415 V 3N ~ + 

5 x 1.5 mm

2

380-415 V 2N ~ + 

4 x 1.5 mm

2

INSTRUCTIONS FOR USE 

The hob automatically switches off if no function is selected within 10 seconds of switching on.

230 V

230 V

230 V

230 V

230 V

230 V

230 V

230 V

230 V

230 V

230 V

380-415 V 3N ~

220-240 V ~

AU and UK

220-240 V ~

380-415 V 2N ~

220-240 V 3 ~ (Belgium only) 380-415 V 2N ~ (Holland only)

C

B

A

To select and activate the cooking zones

Hob ON/OFF

To set the minute 
counter

To enable the hold 
function

Slide touchscreen

To lock the control panel

To select one of the automatic functions

To select the Multi-zone function

i

Summary of Contents for SIM592B















Reviews: