To activate the function the
cooking zone must be cold.
To activate the function for a cooking
zone: touch the end of the control bar on
the right ( comes on). Immediately
touch a desired heat setting. After 3
seconds comes on.
To deactivate the function: change the
heat setting.
Power function
This function makes more power available
to the induction cooking zones. The
function can be activated for the induction
cooking zone only for a limited period of
time. After this time the induction cooking
zone automatically sets back to the
highest heat setting.
Refer to “Technical information”
chapter.
To activate the function for a cooking
zone: touch the end of the control bar on
the right. comes on.
To deactivate the function: change the
heat setting.
Perfect-Heat
This function lets you set a heat setting
level to fry your food. The hob keeps the
selected temperature automatically while
frying. Once the heat setting level is set,
no manual temperature adjustment is
necessary.
You can set the function for the
left front cooking zone of the
hob.
CAUTION! Use laminated pans
only with low heat setting level
to prevent overheating and
damage of the cookware.
To activate the function:
1. Put an empty pan on the left front
cooking zone. Do not use a lid while
using the function.
2. Press
. The indicator above the
symbol comes on. The heat setting is
set to .
3. Set the best heat setting for the food
you want to fry. Refer to the table in
Hints and tips chapter. The indicators
above the symbol start to flash slowly.
The zone is heating up.
4. Wait until the pan reaches the
temperature you set. A signal sounds.
All indicators above the symbol are on.
5. Put the food and some fat on the pan.
To deactivate the function:
Touch 0 of the left front cooking zone or
touch
.
Timer
Count Down Timer
You can use this function to set how long
the cooking zone should operate for a
single cooking session.
First set the heat setting for the cooking
zone then set the function.
To set the cooking zone: touch
again and again until the indicator of a
necessary cooking zone comes on.
To activate the function: touch of the
timer to set the time (00 - 99 minutes).
When the indicator of the cooking zone
starts to flash slowly the time counts
down.
To see the remaining time: set the
cooking zone with
. The indicator of
the cooking zone starts to flash quickly.
The display shows the remaining time.
To change the time: set the cooking zone
with
. Touch or .
To deactivate the function: set the
cooking zone with
and touch .
The remaining time counts back to 00.
The indicator of the cooking zone goes
out.
9
