background image

Use

34

Advice on energy-saving

•  The diameter of the base of the pan must 

correspond to the diameter of the 
cooking zone. 

•  When buying a pan, check whether the 

diameter indicated is that of the base or 
the top of the pan, as the top is almost 
always larger than the base.

•  When preparing dishes with long 

cooking times, you can save time and 
energy by using a pressure cooker, 
which also makes it possible to preserve 
the vitamins in the food.

•  Make sure that the pressure cooker 

contains enough liquid as, if there is not 
enough and it overheats, this may cause 
damage to both the pressure cooker and 
the cooking zone.

•  If possible, always cover pans with a 

suitable lid.

•  Choose a pan suitable for the quantity of 

food to be cooked. A large, half-empty 
pan leads to a waste of energy.

Power levels

The power in the cooking zone can be 
adjusted to various levels. The table shows 
the levels suitable for various types of 
cooking.

* see Power function

Switching the hob on and off

Keep the On/Off key 

 pressed in for at 

least 1 second to activate the hob. Keep 
the key 

 pressed in for at least 2 seconds 

to deactivate the hob.

Under certain circumstances, if the 
hob and the oven are being used 
at the same time, the maximum 
power limit that can be used by the 
electrical system might be 
exceeded.

Power level

Suitable for:

0

OFF setting

1 - 2

Cooking small amounts of food 

(minimum power)

3 - 4

Cooking

5 - 6

Cooking large quantities of food, 

roasting larger portions

7 - 8

Roasting, slow frying with flour

9

Roasting

P *

Roasting / browning, cooking 

(maximum power)

If no power value is selected within 
a few seconds, the hob is 
automatically deactivated.

Summary of Contents for SI5641D























Reviews: