background image

 

Auto‐

matic

light

Boil‐
ing

1)

Fry‐
ing

2)

Mode

H6

On

Fan

speed

2

Fan

speed

3

1) The hob detects the boiling process and activates
fan speed in accordance with automatic mode.
2) The hob detects the frying process and activates
fan speed in accordance with automatic mode.
3) This mode activates the fan and the light and does
not rely on the temperature.

Changing the automatic mode

1. Deactivate the appliance.
2. Touch   for 3 seconds. The display

comes on and goes off.

3. Touch 

 for 3 seconds.

4. Touch 

 a few times until 

comes on.

5. Touch   of the Timer to select an

automatic mode.

To operate the hood directly on

the hood panel deactivate the

automatic mode of the function.

When you finish cooking and

deactivate the hob, the hood

fan may still operate for a

certain period of time. After that

time the system deactivates the

fan automatically and prevents

you from accidental activation

of the fan for the next 30

seconds.

Operating the fan speed manually

You can also operate the function
manually. To do that touch   when the

hob is active. This deactivates automatic

operation of the function and allows you to

change the fan speed manually. When
you press   you raise the fan speed by

one. When you reach an intensive level
and press   again you will set fan speed

to 0 which deactivates the hood fan. To

start the fan again with fan speed 1 touch

.

To activate automatic operation

of the function, deactivate the

hob and activate it again.

Activating the light

You can set the hob to activate the light

automatically whenever you activate the

hob. To do so set the automatic mode to

H1 – H6.

The light on the hood

deactivates 2 minutes after

deactivating the hob.

FLEXIBLE INDUCTION COOKING AREA

WARNING! Refer to Safety

chapters.

Flexi4Zone function

The flexible induction cooking area

consists of four sections. The sections can

be combined into two cooking zones with

different size, or into one large cooking

area. You choose the combination of the

sections by choosing the mode applicable

to the size of the cookware you want to

use. There are three modes: Standard

(activated automatically when you activate

the hob), Big mode and Max mode.

To set the heat setting use two

left side control bars.

12

Summary of Contents for SI1F7845B


























Reviews: