Metal grease filters
These can also be washed in the dishwasher, and need to be cleaned when
all the command LEDs light up in a continuous manner or at least once
every 2 months use, or more frequently if use is particularly intensive.
Resetting the alarm signal
• Press button
T1
(see the paragraph on Use).
Cleaning the Filters
• Remove the Filters one at a time, supporting them with one hand while
you pull the lever down with the other.
• Wash the Filters without bending them, and leave them to dry com-
pletely before replacing.
• Replace, taking care to ensure that the handle faces forwards.
Activated Charcoal Filter (Recirculation Version)
• This cannot be washed or regenerated, and must be changed when all the command LEDs start to flash,
or at least once every 4 months.
Activating the alarm signal
• In Recirculation Version Hoods, the Filter Saturation Alarm must be activated on installation or at a later date.
• Press and hold the
Delay
button (
T4
) on the keypad for
5 seconds
and the following will be displayed:
• Leds (L1-L2-L3) flash twice – Activated Charcoal Filter saturation alarm ACTIVATED.
•
Leds (L1-L2-L3) flash once – Activated Charcoal Filter saturation alarm DEACTI
VATED.
CHANGING THE ACTIVATED CHARCOAL FILTER
Resetting the alarm signal
• Press button
T1
(see the paragraph on Use).
Changing the Filter
• Remove the Metal grease filters.
• Remove the saturated Activated Charcoal Filters, as indicated (
A
).
• Fit the new Filters, as indicated (
B
).
• Replace the Metal grease filters.
A
B
EN
9
Summary of Contents for SHR1200X
Page 1: ...User Manual SHR900X SHR1200X ...
Page 11: ......