Cleaning and maintenance
68
Removing racks/trays support frames
Removing the guide frames enables the
sides to be cleaned more easily. This
operation should be performed each time
the automatic cleaning cycle is used (on
some models only).
To remove the guide frames:
1. Unscrew the two fastening pins of the
frame.
2. Pull the frame towards the inside of the
oven.
3. When cleaning is complete, repeat the
above procedures to put the guide
frames back in. Pay attention to the
spacer bushings which need to be
inserted correctly into the frames.
Cleaning the top section
The appliance is fitted with a tilting heating
element that makes it easier to clean the top
part of the oven.
1. Release the upper heating element by
gently lifting it and rotating its retaining
latch by 90 degrees.
2. Gently lower the heating element until it
stops.
3. When you have finished cleaning,
place the heating element back in
position and turn the retaining latch to
lock it in place.
High temperature inside the oven
during use
Danger of burns
• The following operations must only be
carried out when the oven is completely
cold and switched off.
Improper use
Risk of damage to the appliance
• Do not excessively flex the element
during cleaning.
