background image

 

Instructions for the user 

 

27 

 

8.

 

CLEANING AND MAINTENANCE 

 

Before any intervention, disconnect the power supply of the device. 

 

8.1

 

Cleaning the ceramic hob 

 

The hob should be regularly cleaned; preferably after every use, once the residual heat warning lights 

have gone off. 

 

Smudges from aluminium-bottom pans can be easily cleaned off with a cloth 
dampened in vinegar. 
Remove any burnt residues after cooking with the scraper provided; rinse with water 
and wipe dry with a clean cloth. Regular use of the scraper considerably reduces 
the need for chemical detergents for the daily cleaning of the hob. 
Never use abrasive or corrosive detergents (e.g. cleaning powders, oven sprays, 
spot-removers, wire sponges). 

 

NEVER USE A STEAM JET TO CLEAN THE APPLIANCE. 

 

9.

 

SOMETHING WRONG? 

PROBLEM 

POSSIBLE CAUSES 

WHAT TO DO? 

The hob doesn’t work 

-

 

The hob is not wired in or 
switche on at the wall. 

-

 

There is a power failure 

-

 

Switch on at the wall 

 

-

 

Check power supply 

The results of cooking are 
unsatisfactory 

-

 

Temperature is too high or 
too low 

-

 

Wrong shelf position 

-

 

Wrong type of dish 

-

 

Cooking time is incorrect 

-

 

Consult cooking tips 

The hob smokes 

-

 

The hob is dirty 

 

-

 

Food has spilled over 

-

 

Clean the hob once cooking 
is finished. Let it cool first. 

-

 

Use a larger pan 

 

The cooking zones do not come 
on during timed cooking 

-

 

Timed cooking programming 
error 

-

 

Check the instructions for 
timer 

Summary of Contents for SE2641CX















Reviews: