Instructions for the user
7
5.
ELECTRONIC ANALOGUE CLOCK (ONLY ON SOME MODELS)
The programmer user instructions are valid only for the
large oven
.
LIST OF FUNCTIONS
MINUTE-MINDER BUTTON
AUTOMATIC LENGTH / SWITCH-OFF TIMING BUTTON
TIME SETTING AND RESET
VALUE DECREASE BUTTON
VALUE INCREASE BUTTON
5.1
Setting the time
When the oven is used for the first time, or after a power blackout, the display flashes on and off at
regular intervals. Press the
key for 1/2 seconds to stop the display flashing and start setting of the
current time. Press the value modification keys
or
to increase or decrease by one minute for
each time a key is pressed.
Press one of the two value modification keys until the current time appears. The clock will start from
the time set 6/7 seconds after the last key is pressed.
At the end of each programmed cooking operation, the clock gives 8 beeps, repeated 3/4 times at
intervals of about 1 and a half minutes. The beeps can be stopped at any moment by pressing any
key.
5.2
Minute-minder
This function does not stop cooking but just triggers the beeps.
-
When the
key is pressed the display illuminates, appearing as shown in
figure 1;
-
Press the
or
keys within 6/7 seconds to set the minute-minder.
Whenever a key is pressed, 1 outside segment, representing 1 cooking minute
will light up (figure 2 shows 10 cooking minutes).
1
-
The countdown will start 6/7 seconds after the last key is pressed; at the end of
it, you will hear the beeps.
-
During cooking with countdown, the current time can be displayed by pressing
the
key once; press again to return to the minute-minder display.
2
-
At the end of the countdown, the oven has to be switched off by hand, by
turning the thermostat and the function selector to 0.
Summary of Contents for SDO10
Page 24: ...914772608 B...
