Instructions for the user
94
8.9.2
Setting the cleaning cycle
Turn the function selection knob to select one of the
two cleaning cycles out of
and
.
To activate the cleaning cycle (Pyrolysis) the
duration must be set from a minimum of 1h 30mins.
to a maximum of 3 hours.
Turn knob anti-clockwise to set the pyrolysis time in
the programming window.
Two minutes after the cleaning (pyrolysis) cycle
starts, a door locking device which prevents opening
of the door will be tripped.
will light up to
indicate that the locking device has been activated.
At the end of the cleaning cycle the door locking
device will remain active until the temperature inside
the oven has reached a safety threshold. When the
oven has cooled down, collect the residues from
automatic cleaning with a damp microfibre cloth.
In order to select a delayed cleaning cycle
, the
cleaning cycle can be programmed to start at a
preset time.
After setting the cycle duration pull and rotate the
knob anti-clockwise aligning the pointer with the
required start time.
It is not possible to select any functions once the door locking device has been
activated. Wait for
to go out.
