Instructions for the user
83
6.7
Setting the current time
Press
or
to decrease or increase the time
shown.
Hold down the symbol in question to increase or
decrease rapidly.
Temperature zone
A few seconds after the last button is pressed, the
time display will become steady and the colon
separating the hours from the minutes will flash to
indicate the start of the countdown.
It may become necessary to change the current
time, for example for daylight saving time. Starting
from stand-by (see “6.5 Operating modes”), hold
down
or
to enter time adjustment mode
and to increase or decrease the value.
Temperature zone
6.8
Accidental control activation lock
This lock is used to prevent any accidental contact with the touch-sensitive
zones. It activates 30 seconds after the last pressure on any symbol and in all
operating modes.
When it is activated, will appear on the display
.
In order to enable the controls after the lock has taken effect, press and hold any
symbol briefly until a short beep sounds. If the symbol is pressed for longer than
indicated, the appliance will treat the attempt to unlock the controls as an
accidental instruction, it will be ignored and a longer beep will sound.
If the unlocking procedure is performed correctly,
will go out and a
confirmation beep will sound, indicating that the controls are now enabled.
