background image

65

Contents

INSTRUCTIONS FOR THE USER: these contain user advice, description of
the commands and the correct procedures for cleaning and maintenance
of the appliance.

INSTRUCTIONS FOR THE INSTALLER: these instructions are intended for
the qualified technician who must perform the installation, put it into
operation and test the appliance.

1.

INSTRUCTIONS FOR USE ......................................................................... 66

2.

SAFETY PRECAUTIONS ............................................................................ 68

3.

ENVIRONMENTAL RESPONSIBILITY ........................................................ 70

4.

GET TO KNOW YOUR OVEN...................................................................... 71

5.

AVAILABLE ACCESSORIES ....................................................................... 72

6.

USING THE OVEN ...................................................................................... 79

7.

COOKING WITH THE OVEN....................................................................... 95

8.

CLEANING AND MAINTENANCE ............................................................. 105

9.

EXTRAORDINARY MAINTENANCE ......................................................... 117

10. INSTALLING THE APPLIANCE ................................................................. 123

Summary of Contents for sc107sg 8































































Reviews: