Smeg SC106-8 Manual Download Page 22

Page: 22 / 62

Instructions for the user

6.8

Using the timer

Warning: the timer does not stop the cooking process. It only warns the user that the
preset number of minutes have passed.

The timer can be activated in any of the appliance's
modes. Press the temperature selection knob and

the display will show the

figures

(constantly on) and the

symbol (flashing).

(Temperature knob)

Turn the knob right or left to set the minutes from
00:01 to 04:00.

A few seconds after the required duration is set,

will stop flashing and stay on constantly; the
countdown will start from that moment.

(Temperature knob)

At this point it is possible to select the desired
cooking function and wait for the buzzer to sound,
indicating that the cooking time is over.

Press the temperature selection knob to switch off
the buzzer. Another time can then be selected by
turning the same knob right or left.

(Temperature knob)

If the timer was set in STAND-BY mode, when the oven is activated in ON mode
(selection of a cooking operation), the counter remains active.

Summary of Contents for SC106-8































































Search results

Summary of Contents for SC106-8

Reviews:

Related manuals for SC106-8

Brands by name

Popular brands

Smeg SC106-8, Manual

Search results

Summary of Contents for SC106-8

Reviews:

Related manuals for SC106-8

Brands by name

Popular brands