background image

Instructions for the User

22

7.1

Cooking advice and instructions

7.1.1

General advice

We recommend preheating the oven before putting the food in.

 Do not put

food into the compartment until the warning light has switched off to indicate that

the preset temperature has been reached or until the display is flashing.

For cooking on several levels, we recommend using a fan-assisted function to

achieve uniform cooking at all heights.

In general, it is not possible to shorten the cooking times by increasing the

temperature (the food could be well-cooked on the outside and undercooked on

the inside).

While cooking desserts or vegetables, excessive condensation may form on the
glass. In order to avoid this, open the door very carefully a couple of times while
cooking.

7.1.2

Advice for cooking meat

Cooking times, especially for meat, vary according to the thickness and quality

of the food and to consumer's taste.

We recommend using a meat thermometer for meat when roasting it.

Alternatively, simply press on the roast with a spoon: if it is hard, it is ready; if

not, it needs another few minutes cooking.

7.1.3

Advice for cooking desserts and biscuits

Use dark metal moulds for desserts: they help to absorb the heat better.

The temperature and the cooking duration depend on the quality and

consistency of the dough.

Check whether the dessert is cooked all the way through: at the end of the

cooking time, put a toothpick into the highest point of the dessert. If the dough

does not stick to the toothpick, the dessert is cooked.

If the dessert collapses when it comes out of the oven, on the next occasion

reduce the set temperature by about 10°C, selecting a longer cooking time if

necessary.

Summary of Contents for SAP306X-9









































Reviews: