background image

3

Contents

INSTRUCTIONS FOR THE USER: these contain user advice, description of
the commands and the correct procedures for cleaning and maintenance
of the appliance.

INSTRUCTIONS FOR THE INSTALLER: these instructions are intended for
the authorised person who must perform the installation, put it into
operation and test the appliance.

Further information about the products can be found at www.smeg.com

@

1.

INSTRUCTIONS FOR USE ................................................................ 4

2.

SAFETY PRECAUTIONS ................................................................... 6

3.

ENVIRONMENTAL RESPONSIBILITY ............................................... 8

4.

GET TO KNOW YOUR OVEN............................................................. 9

5.

AVAILABLE ACCESSORIES ............................................................ 10

6.

USING THE OVEN ........................................................................... 12

7.

COOKING WITH THE OVEN............................................................ 20

8.

CLEANING AND MAINTENANCE .................................................... 28

9.

EXTRAORDINARY MAINTENANCE ................................................ 33

10. INSTALLING THE APPLIANCE ........................................................ 37

Summary of Contents for SAP306X-9









































Reviews: