background image

Safety 

Precautions before using 

  Unpack all the materials. 

  The  installation  and  connecting  of  the  appliance  have  to  be  done  by  approved 

specialists. The manufacturer cannot be responsible for damage caused by installation or 
connecting errors. 

  To be used, the appliance must be  well-equipped and installed in a kitchen unit and an 

adapted and approved work surface. 

  This  domestic  appliance  is  exclusively  for  the  cooking  of  food,  to  the  exclusion  of  any 

other domestic, commercial or industrial use.  

  Remove all labels and self-adhesives from the ceramic glass. 

  Do not change or alter the appliance. 

  The cooking plate cannot be used as freestanding or as working surface.  

  The appliance must be grounded and connected conforming to local standards. 

  Do not use any extension cable to connect it. 

  The  appliance  cannot  be  used  above  a  dishwasher  or  a  tumble-dryer:  as  steam  may 

cause damage. 

Using the appliance 

  Switch the heating zones off after using. 

  Keep an eye on the hob whilst cooking using grease or oils that may quickly ignite.  

  Be careful not to burn yourself while or after using the appliance. 

  Make sure no cable of any fixed or moving appliance contacts with the glass or the hot 

saucepan.  

  Magnetically objects (credit cards, floppy disks, calculators) should not be placed near to 

the engaged appliance.  

  Do not place any metallic object on the hob except for pans or cooking utensils. In case 

of untimely engaging or residual heat, this one may heat, melt or even burn.  

  Never cover the appliance with a cloth or a protection sheet. This could become very hot 

and catch fire.  

  This  appliance  is  not  intended  for  use  by  persons  (including  children)  with  reduced 

physical,  sensory  or  mental  capabilities,  or  lack  of  experience  and  knowledge,  unless 
they  have  been  given  supervision  or  instruction  concerning  use  of  the  appliance  by  a 
person responsible for their safety. 

  Children should be supervised to ensure that they do not play with the appliance. 

  Metallic objects such as knives, forks, spoons and lids should not be placed on the hob 

surface since they can get hot. 

Summary of Contents for SA611XC-1













Reviews: