Smeg S7323LFLD2P2C, Detailed Instructions For Use

Page: 16 / 36

16
829705
INTENSIVE COOLING (COOLING BOOST) FUNCTION
To activate the intensive cooling
(cooling boost) function, press the
A
key several times until the symbol C
lights up.
• Use this setting after switching on the appliance for the fi rst time, before
cleaning, or 24 hours before adding a large amount of food.
• If any other function is selected while the intensive cooling function is active,
the intensive cooling function will be deactivated immediately.
• To switch off the intensive cooling function, press the A key to select the
desired temperature (
B
). If the intensive cooling function is not deactivated
manually, it will be automatically switched off (after approximately six hours),
and the temperature will return to the most recently set value.
• If there is a power outage while the intensive cooling function is active, the
function will be restarted when power supply resumes.
• When the intensive cooling function is activated, the appliance will
operate with maximum power. During this time, operation may be
somewhat louder.
i
The numbers 2, 4, 6 and 8 indicate the
degrees Celsius (°C) in the appliance
refrigerator compartment.
• The recommended temperature
setting is +4 °C. At this temperature,
food quality and freshness are
preserved longer.
• If the temperature of the room where
the appliance is installed is below
16 °C, we recommend setting a
temperature lower than 4 °C.