Smeg S7220FND Manual Download Page 5

FastFreeze function

To switch on the FastFreeze function :

1.

Press Mode button until the

corresponding icon appears.

The FastFreeze indicator flashes.

2.

Press OK button to confirm.

The FastFreeze indicator is shown.

The FastFreeze function stops

automatically after 52 hours.

To deactivate the FastFreeze

press Mode in order to select an

other function or repeat the

procedure until the FastFreeze

indicator goes off.

DrinksChill function

The DrinksChill function is to be used to set

an acoustic alarm at the preferred time,

useful for example when a recipe requires

to cool down a mixture for a certain period

of time, or when a reminder is needed in

order not to forget the bottles placed in the

freezer for fast cooling.

1.

Press Mode until the corresponding

icon appears.

The DrinksChill indicator flashes.

The Timer shows the set value (30 minutes)

for a few seconds.

2.

Press the Timer regulator to change the

Timer set value from 1 to 90 minutes.

3.

Press OK to confirm.

The DrinksChill indicator is shown.

The Timer start to flash (min).

At the end of the countdown the DrinksChill

indicator flashes and an audible alarm

sounds that indicates that any drinks

contained in the freezer compartment

should be removed and it is necessary to

press OK to switch off the sound and

terminate the function.
To switch off the function repeat the

procedure until the DrinksChill goes off.

It is possible to change the time

during the countdown and at

the end by pressing the

Temperature colder button and

the Temperature warmer button.

ChildLock function

Activate the ChildLock function to lock the

buttons from unintentional operation.

1.

Press Mode until the corresponding

icon appears.

The ChildLock indicator flashes.

2.

Press OK to confirm.

The ChildLock indicator is shown.

To deactivate the ChildLock function,

repeat the procedure until the ChildLock

indicator goes off.

High temperature alarm

An increase in the temperature in the

freezer compartment (for example due to

an earlier power failure) is indicated by

flashing the alarm icon and freezer

temperature indicators, and sounding of

buzzer.
Press any button.

The buzzer switches off.

The freezer temperature indicator shows

the highest temperature reached for a few

seconds, then displays the set temperature

again.

The alarm indicator continues to

flash until the normal conditions

are restored.

Door open alarm

An acoustic alarm will sound when the door

is left open for around 80 seconds.
When normal conditions are restored (door

closed), the acoustic alarm will stop.

22

Summary of Contents for S7220FND

















Reviews: