Smeg PVA96, Instructions For Installation And Use Manual

Page: 4 / 18

Instructions for the installer
6
2. INSTALLATION OF THE APPLIANCE
It is the law that all gas appliances are installed by an authorised
persons . Clearance around the appliance must comply with the
requirements of AGA601. (see 2.6)
2.1 Positioning
The following operation requires building and/or carpentry work so must
be carried out by a competent tradesman. Installation can be carried out
on various materials such as masonry, metal, solid wood or plastic
laminated wood as long as they are heat resistant (T 90°C).
Overall dimensions: location of gas and electrical connection points (all
measures in mm).
PVA 96
A 50
B 90
C 50
D 60
2.1.1 Fixing
Insert screws A of the brackets provided into slots B under the appliance.
Slide the brackets into slots B . Position the appliance on to the support
frame and secure it by means of screws C .
2.2 Electrical connection
Make sure that the voltage and capacity of the power line conform to the
data shown on the plate located under the casing.
Do not remove this
plate for any reason.